EPDM Maintenance & Repair 2018-09-28T18:10:39+00:00

EPDM Maintenance & Repair

Our proven flat roof products are used by both contractors and homeowners for flat roof repairs of minor damage. The following roofing materials can be used for EPDM flat roof maintenance and repairs.

Rubber Seam Kit

25 ft. roll of 3” Seam Tape, 1 pint Primer, scrub pad, seam roller, and 2 wipe clothes.

Seam Tape

Seams two EPDM sheets together. Heavy duty, easy to use, no caulking required.

• 3” x 50’ rolls, 1 roll per box.

Seam Primer

Cleans and primes all EPDM surfaces prior to installation of tapes, patches, etc. One-step, dries quick.

• 1-pint, 6 per case.

Latex Bonding Adhesive

Adheres EPDM to suitable substrate. High coverage, environmentally safe.

• 1-gallon pails, 4 per case.

Tape Flashing

Waterproofs around corners, pipes, vents, other areas where EPDM must be molded. Fast, easy, peel and stick.

• 12” x 25’ rolls, 1 roll per box.

Rubber Corner Covers

8” EPDM discs with adhesive back to reinforce corners, other flashing. Less waste.

• (4) 8” disks per box. 10 boxes per case.

Cover Strip

Pressure-sensitive tape for covering perimeter metal edge detail and patch repairs.

• 5” x 50’ rolls, 1 roll per box.

Reinforced Strip

Used at base of any vertical wall that EPDM will be adhered to. Plates and screws needed every 6”.

• 6” x 50’ rolls, 1 roll per box.

Rubber Patch Kit

Patch cuts, holes, leaking seams of EPDM surfaces.

• (4) 8” EPDM patches, 1-pint seam primer, scrub pad, wood roller and wiping cloths.

Fasteners and Plates

Used for the secure installation of any approved insulation board or the installation of the reinforced strip.

• Boxes of 100. 5 boxes per case.

RoofKit DVD Instructional Installation Video

Installation DVD that walks you or your customer through the basic steps of installing RoofKit EPDM on any small roof.