White Reinforced Accessories
RoofKit offers a complete line of high-quality accessories for the installation of your White Reinforced roof.
View details and additional information below on each of our accessory products.
White Reinforced Roofing Membrane
Commercial-grade 45 mil; resists moisture, ozone, and ultraviolet radiation.
White Membrane Water Based Bonding Adhesive
Adheres white membrane to suitable substrate. High coverage rate, environmentally safe.
Sizes:
- 3.5-gallon pails or 1-gallon pails
White Membrane Seam Tape
Seams two white membrane sheets together. Heavy duty, easy to use, with no caulking required.
Sizes:
- 3” x 50’ rolls, 1 roll per box
White Membrane Cover Strip
Peel and stick tape for completing metal edge detail. Also for patching long tears in membrane.
Sizes:
- 6” x 50’ rolls, 1 roll per box
White Membrane Seam Kit
For seaming up to 25 feet of membrane.
Sizes:
- 25 ft. roll of 3” Seam Tape, 1 pint Primer, scrubbie pad, seam roller, and 2 wipe cloths
Patch & Corner Cover Kit
Used for repairing small cuts and holes in white membrane.
Sizes:
- (6) 8” circular peel and stick patches, 1-pint seam primer, scrubbie pad, wood roller and wiping cloths.
White P/S Pipe Boot
Seals pipes, stacks or vents up to 6” in diameter.
Sizes:
- 1 boot, 1 clamp per box
White Termination Bar
For perimeter and edge terminations.
Sizes:
- 10 ft. lengths, 25 lengths per tube
- Aluminum also available
White Caulk
For sealing seams and terminations.
Sizes:
- 10.3 oz. tubes
Compatible “Blue Label” RoofKit Products:
Seam Primer
Used for cleaning and priming all roof membrane surfaces prior to installation of RoofKit products including Tapes, Multi-Purpose Adhesive, Caulk, Corner Covers and Pipe Boot
Screws and Plates
Used for the secure installation of any approved insulation board or the installation of the Reinforced Strip. Screws can also be used for Termination Bar installation
Waterstop
Used to prevent water infiltration UNDER the membrane at terminations, pipe boots, and drains. Acts as extra protection for your roof.
4′ 10″ Aluminum Termination Barr
Used for horizontal or vertical termination of the membrane at walls and gutters or over the edge of the roof surface